深宏遠主要產品有:

 風機，負壓風機、環保空調、降溫水簾、排風扇、抽風機、工業風扇，通風設備，通風機，排氣扇，水簾,深圳風機,工業風機,廠房降溫,車間降溫,排風機,工業空調,玻璃鋼風機,工業排風扇,大風機,降溫風機,降溫空調等通風降溫設備。 

深宏遠排風扇的降溫原理：

深宏遠排風扇是利用空氣對流、負壓換氣的降溫原理，由安裝地點的對向---大門或窗戶自然吸入新鮮空氣,將室內悶熱氣體迅速，強制排出室外,任何通風不良問題均可改善,降溫換氣效果可達90%-97%。 

排風扇，廠房降溫，HY-F2排風扇圖片：

深宏遠排風扇的特點：

一、   風扇葉片與多V皮帶輪組的平衡校正由專業技術人員負責。采用國外先進技術電腦平衡校正儀器，等級達4級水準（G6.3），符合ISO1940鋼性運轉體技術,達國際品質要求。

二、   本機所匹配的1HP馬達采用全鋁合金外殼，密封嚴、抽風效能好、耗電量少、每小時只須0.75度電力。

三、   傳動皮帶采用PK多V皮帶,耐磨損,運轉時無傳統皮帶打滑及噪音的困擾。

四、   百葉窗的設計運用空氣順流原理,不需要使用電力及人員開關,美觀大方,且可以防雨水侵入。

五、   主體外框采用FRP材質,可減少金屬共鳴,且抗酸堿,防腐蝕,增加使用年限。(可連續使用10-20年)

深宏遠六葉負壓風機的特點：

Shen hong yuan Six of the suction ventilators features:

一、   風扇葉片與多V皮帶輪組的平衡校正由專業技術人員負責。采用國外先進技術電腦平衡校正儀器，等級達4級水準（G6.3），符合ISO1940鋼性運轉體技術,達國際品質要求。

1, fan blades and multi-V pulley group balance correction by professional technical staff. Use of advanced technology from abroad balance correction computer equipment, the standard grade of 4 (G6.3) and with the operation of the ISO1940 steel technologies to international quality requirements.

二、   本機所匹配的1HP馬達采用全鋁合金外殼，密封嚴、抽風效能好、耗電量少、每小時只須0.75度電力。

2. This machine-match 1HP All motors used aluminum alloy shell, Seal strict,Good ventilation efficiency, Less power consumption, only 0.75 per hour of electricity.

三、   傳動皮帶采用PK多V皮帶,耐磨損,運轉時無傳統皮帶打滑及噪音的困擾。

3.more transmission belt use PK V belts, wear resistance, When running the not traditional belt slipping and noise nuisance.

四、   百葉窗的設計運用空氣順流原理,不需要使用電力及人員開關,美觀大方,且可以防雨水侵入。

4. Louver air downstream use of the design principles, Do not use electricity and personnel switch, handsome generous, and can prevent water intrusion.

五、   主體外框采用FRP材質,可減少金屬共鳴,且抗酸堿,防腐蝕,增加使用年限。(可連續使用10-20年)

5. FRP materials by the main frame, metal resonance can be reduced ,And resistance

Acid-base,anti-corrosion, and increase life span. (Continuous use for 10-20 years).

深宏遠負壓風機的降溫原理：

Shen hong yuan the suction ventilators coolingPrinciple:

負壓風機是利用空氣對流、負壓換氣的降溫原理，由安裝地點的對向---大門或窗戶自然吸入新鮮空氣,將室內悶熱氣體迅速，強制排出室外,任何通風不良問題均可改善,降溫換氣效果可達90%-97%。

suction ventilators Is to use air convection cooling principle of negative pressure ventilation, by the location of the installation of the doors or windows - to the natural inhalation of fresh air, indoor hot gas rapidly, from the mandatory outdoor, Any adverse problems can be improved ventilation, Ventilation cooling effect of up to 90% -97%.

EVAPORATIVE COOLING

(夏天在編織，洗染，生產&加工服裝工廠等很容易達到40度用這種風機很容易降下7－12度。)

Temperature can easily exceed 40℃in spining,knitting,dyeing,finishing & garments factory during the summer if they are not equipped with cooling system.Such high temperature reduces product quality & worker productivity.Evaporative cooling is the most common method for reducing the temperature inside a factory.Air conditioning or refrigeratuib systems can be used,but their installation and operation costs are usually prohibitive.

Evaporative cooling is a process that reduces the temperature 7-12℃of air by the evaporation of water into the airstreams.As water is evaporated,energy is lost from the air reducing its temperature.Reduced temperature enters in to room and room become cool.

EVAPORATIVE COOLING PAD AND EXHAUST FAN SYSTEM

A Pad-and-Fan cooling system typically consists of axial flow

深宏遠排風扇參數表：