| 產地 | 深圳 |
|---|---|
| 設備類型 | 其它 |
| 品牌 | HI-link |
| 型號 | HLK-RM10 |
| 加工定制 | 是 |
您在購買RM10模塊時建議您同時購買天線，以方便您更精準的測試，RM10是需要外帶天線的，您可以聯系客服購買
HLK-RM10是一種新的低成本嵌入式UART-ETH-WIFI模塊(串口-網絡以太網方式)由深圳Hi-link電子有限公司有限公司
本產品是嵌入式模塊基于通用串行接口的網絡標準,內置TCP / IP協議棧,使用戶串行端口,以太網、無線網絡(wifi)onversions之間的接口。通過HLK-RM10模塊,傳統的串行設備不需要改變任何配置,數據可以通過互聯網傳播網絡。為用戶提供一個快速解決方案的串行設備通過以太網傳輸數據
Pin Assignment
Pin No | Signal Type | Description |
1 | 3.3VD | Supply Voltage, 3.3V+/-10% |
2 | GND | Analogue Ground |
3 | RXD | UART1 RXD |
4 | RTS | UART1 RTS |
5 | TXD | UART1 TXD |
6 | WPS/RST | WiFi Protected Setup /Restore factory value |
7 | CTS | UART1 CTS |
8 | UART_TX | UART0 TXD |
9 | UART_RX | UART0 RXD |
10 | link1 | 10/100 PHY Port #1 activity LED |
11 | RXIP1 | 10/100 PHY Port #1 RXP |
12 | RXIN1 | 10/100 PHY Port #1 RXN |
13 | TXOP1 | 10/100 PHY Port #1 TXP |
14 | TXON1 | 10/100 PHY Port #1 TXN |
15 | TXON2 | 10/100 PHY Port #2 TXN |
16 | TXOP2 | 10/100 PHY Port #21 TXP |
17 | RXIP2 | 10/100 PHY Port #2 RXP |
18 | RXIN2 | 10/100 PHY Port #2 RXN |
19 | I2C_CLK | General GPIO Reserved |
20 | I2C_SD | General GPIO Reserved |
21 | ES/RST | Exit transparent transmission mode/Restore factory value |
22 | USB_M | Reserved |
23 | USB_P | Reserved |
24 | link2 | 10/100 PHY Port #2 activity LED |
25 | WLAN_LED | WLAN Activity LED |
26 | VO1.8 | 1.8V Output (Suuport Atmost 300mA) |
27 | GND | Analogue Ground |
28 | 3.3VD | Supply Voltage, 3.3V+/-10% |
